Multi-electrode Spot Welding Machine MTM-32
OKP 34 4148TU16-539.770-77
The machine is designed for resistance welding of a wide range of heavy reinforcing meshes.In order to reduce power consumption the machine has two and four stage welding modes, as well as a staggered order welding mode.
Technical description:
| Specifications | MTM-32 |
|---|---|
| Rated mains voltage, V | 380 |
| Supply frequency, Hz | 50 |
| Max. secondary current in a welding circuit during short circuit of two pairs of electrodes, kA | 36 |
| Power at 50% duty cycle, kVA | 515 |
| Nominal continuous secondary current in a welding circuit, A | 9000 |
| Number of electrode pairs | 16 |
| Distance between the electrodes, mm | 200 |
| Max. travel of the upper electrode, mm, at least | 60 |
| Nominal pressing force of the electrodes (at compressed air pressure 0.45 MPa (4.5 kgf/cm2)), kgf | 1500 |
| Maximum transverse bars welding rate per hour: | |
| for 14 mm longitudinal bars mesh | 480 |
| for 25+ mm longitudinal bars mesh | 300 |
| Welded bars diameter, mm: | |
| Longitudinal | 12 to 32 |
| Transverse | 8 to 14 |
| Welded mesh dimensions, mm: | |
| Width | 1050-3050 |
| Length: Minimum | 1450 |
| Length: Maximum | 7150 |
| Overall dimensions, mm | 2760x3595x1960 |
| Weight, kg | 5400 |
