Resistance Butt Seam Flash Welding Machine MSO-101
This machine is designed for resistance butt seam continuous flash welding of wire and wire rods 10 to 20 mm in diameter, as well as rectangular cross-section rods made of low-carbon alloyed steel and non-ferrous metals.Technical description:
| Specifications | MSO-101 |
|---|---|
| Three-phase supply mains voltage, V | 380 |
| Supply frequency, Hz | 50 |
| Welding transformer power at 50% duty cycle at the highest stage, kVA, at least | 63 |
| Nominal continuous secondary current, kA, at least | 6,3 |
| Maximum continuous secondary current, kA, at least | 6,2 |
| Number of secondary voltage control stages | 4 |
| Secondary voltage control limits, V | 5...7 |
| Nominal force at 0.5 MPa pressure, kgf, at least: | |
| clamping force | 2600 |
| upset force | 1200 |
| Clamping drive | pneumatic |
| Flash-off drive | manual |
| Upset drive | pneumatic |
| Maximum welded cross-section area, mm2 | 300 |
| Maximum momentary welding rate, welds/hour | 150 |
| Overall dimensions, mm | 1025x637x1240 |
| Weight, kg | 580 |
