Special Machine MSO-16.06 for Butt Seam Welding of Strips up to 400 mm Wide
This machine is designed for continuous flash resistance butt seam welding of steel strips 50 to 400 mm wide and 1.5 to 5 mm thick, made of low-carbon and low-alloyed steels. The machine is designed to be used as part of steel strip flow-line machining facilities. Technical description:
| Specifications | MSO-1606 |
|---|---|
| Three-phase AC supply mains voltage, V | 380 |
| Supply frequency, Hz | 50 |
| Power at 50% duty cycle, kVA | 200 |
| Secondary voltage, V | 5...23, 75 |
| Number of adjustment steps | 24 |
| Nominal continuous secondary current, A | 6760 |
| Nominal upset force, kgf | 16000 |
| Maximum clamping force, kgf | 39000 |
| Strips (cross-section 4x400) welding duration, s | 60 |
| Welding device in-line travel, mm | 470 |
| Nominal pressure: | |
| - in hydraulic system, MPa (kgf/cm2) | 20(200) |
| - in pneumatic system, MPa (kgf/cm2) | 0,63(6,3) |
| Cooling water consumption at mains water pressure 294x103 Pa (3.0 kgf/cm2), m3/h, not exceeding | 3,0 |
| Overall dimensions, mm: | |
| machine | 3180x3345x2680 |
| hydraulic drive station | 1500x1260x2135 |
| hydraulics unit | 1300x520x2040 |
| equipment cabinet | 500x482x1975 |
| control cabinet | 800x600x2175 |
| console group | 800x600x2175 |
| Weight, kg | 15390 |
