Direct (Rectified) Current Seam Welding Machine MSHV-6303
OKP 34 4143 0099TU16-683.030-85
The machine is designed for direct current seam welding of structures assembled by flange welding, including fuel and hydraulic oil tanks, panel radiators and other items with 0.8+0.8 to 3+3 mm thick details made of cold-rolled low-carbon or low-alloyed steel with or without metallic anticorrosive coating, as well as stainless steel, aluminium and titanium alloys.
The welding wheels are set at an angle to one another.
Technical description:
| Specifications | MSHV-6303 |
|---|---|
| Rated mains voltage, V | 380 |
| Supply frequency, Hz | 50 |
| Power at 50% duty cycle, kVA, at least | 415 |
| Maximum secondary current, kA | 63 |
| Rated continuous secondary current, kA | 40 |
| Pressing force, kgf: | |
| minimum, at most | 392 /400/ |
| nominal | 1960/2000/ |
| maximum, at least | 2450 /2500/ |
| Electrode stick-out distance, m | 0,7 |
| Electrode clearance, mm | 140 |
| Upper wheel electrode travel, mm: | |
| at least | 80 |
| Lower wheel electrode travel, mm: | |
| at least | 60 |
| Linear speed of electrode wheels, m/min: | |
| minimum, at most | 0,5 |
| maximum, at least | 10 |
| Momentary welding rate when welding 1.2+1.2 mm thick low-carbon steel, m/min | 2 |
| Wheel electrode angle | 7°±1° |
| Overall dimensions of the machine, mm | 2600x1420x2800 |
| Weight, kg | 6000 |
