Machine MRH-14001 for Resistance Welding of Semiconductor Device Cases
OKP 34 4148IELA.683255.004 TU
This machine is designed for resistance projection low-frequency current welding of semiconductor device cases (with a projection perimeter of 50 to 100 mm).
Technical description:
| Specifications | MRN-14001 |
|---|---|
| Rated mains voltage, V | 380 |
| Supply frequency, Hz | 50 |
| Rated continuous secondary current, kA | 22 |
| Power consumption during welding of three KT-09 cases, kVA, at most | 360 |
| Power at 50% duty cycle, kVA | 123 |
| The main pressing drive force at compressed air pressure 0.4 MPa (4.0 kgf/cm2), kgf | 3050±100 |
| Welding tip pressure limits, kgf | 400… 1000 |
| Welded projection perimeter, mm | 50… 100 |
| Maximum momentary welding rate when welding devices in KT-09 cases, welds/min | 50 |
| Overall dimensions, mm | 3500x2800x2200 |
| Weight of the machine with control cabinet, kg, at most | 5000 |
| Weight of the machine without control cabinet, kg, at most | 4700 |
