PUNP, PUN, PUGNP, APUNP, APUN

Household wires PUNP, PUN, PUGNP, APUNP, APUN TU16.K13-020-93
These wires are designed for fixed placing in lighting networks with a nominal voltage up to 250 V AC at 50 Hz; for installation and connection of household low-current appliances to the AC mains up to 250 V at 50 Hz; and installation of thermocouples, including those used for repair purposes.

PUNP is a flat wire with copper conductors, flexible PVC insulation and sheath. It is designed for fixed installation (including attachment to wooden structures) in lighting networks with a voltage up to 250 V.

APUNP is the same type of wire but with an aluminium conductor.

PUN is a wire with copper conductors and flexible PVC or rubber insulation. For fixed installation in temporary lighting networks with a voltage up to 250 V, to be attached to fireproof structures.

APUN is the same type of wire but with an aluminium conductor.

PUGNP is a FLEXIBLE flat wire with copper conductors, flexible PVC insulation and sheath. It is designed for fixed installation (including attachment to wooden structures) in lighting networks with a voltage up to 250 V.

Wire type	Number of conductors	Nominal cross-section of the conductors, mm2 (diameter, mm)
PUNP	2 3	1,0-6,0 1,5-6,0
PUN	1	1,0-4,0
PUGNP	2 3	0,35-6,0 0,35-4,0
APUNP	2 3	2,5-6,0
APUN	1	2,5-6,0

The colour of the insulation is not restricted. The desired colour of the insulation, including yellow-green for the earthing conductor and blue for the zero conductor, should be specified at the time of ordering. PUNP, PUGNP and APUNP wires are fire-retarding if laid in a single line. They are designed for use at an ambient temperature from -15 to +50°C.